TP-Link Archer C7 AC1750 User Manual page 119
Archer c7 ac1750 wireless dual band gigabit router
Hide thumbs
Also See for Archer C7 AC1750:
- Quick start manual ,
- Manual (9 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
Get IPv6 prefix delegation - Get a prefix delegation IPv6 address by DHCPv6 from the
•
ISP, and the clients in LAN create IPv6 address with the delegation.
Use IP address specified by ISP - Input a static IPv6 address from the ISP
•
Click the Connect button to connect immediately.
Click the Disconnect button to disconnect immediately.
IPv6 Address Assign Type - There are two types of assignation for IPv6 address: SLAAC
(Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol
for IPv6) Server.
SLAAC
IPv6 Address Prefix -The Prefix of IPv6 Address
•
DHCPv6 Server
Release Time - the length of time a network user will be allowed to keep connecting to the
•
router with the current DHCPv6 Address. Enter the amount of time (in seconds) that the
DHCPv6 address will be leased. The time range is 1~691200 seconds. The default value
is 86400 seconds.
IPv6 Address - Displays the LAN IPv6 Address.
•
4)
Tunnel 6to4
Address/Subnet Mask/Default Gateway - the IPv4 address/ subnet mask/ default gateway
assigned, in dotted-decimal notation.
MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks
is 1480 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely required,
and should not be done unless you are sure it is necessary for your ISP connection.
Archer C7
AC1750 Wireless Dual Band Gigabit Router
Figure 4-111 Tunnel 6to4
- 108 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer C7 AC1750 and is the answer not in the manual?
Questions and answers
I forgot my username and password for my AC1750 wireless router
To reset the username and password for the TP-Link Archer C7 AC1750 wireless router, follow these steps:
1. Reset to Factory Defaults: Press and hold the reset button on the router for about 10 seconds until the router restarts. This will restore all settings, including the username and password, to default values.
2. Default Login Credentials:
- Username: `admin`
- Password: `admin`
3. Change the Password:
- Log in to the router's web interface using the default credentials.
- Navigate to the settings menu where you can update the username and password.
- Enter a new password and save the changes.
Note: Resetting the router will erase all custom settings, including Wi-Fi names and passwords.
This answer is automatically generated
Laptop unable to access wifi