TP-Link Archer C7 AC1750 User Manual page 81
Archer c7 ac1750 wireless dual band gigabit router
Hide thumbs
Also See for Archer C7 AC1750:
- Quick start manual ,
- Manual (9 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
To add a new rule, follow the steps below.
1.
Click the Add New... button, the next screen will pop-up as shown in Figure 4-62.
2.
Select a common application from the Common Applications drop-down list, then the
Trigger Port field and the Incoming Ports field will be automatically filled. If the Common
Applications do not have the application you need, enter the Trigger Port and the
Incoming Ports manually.
3.
Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either
TCP, UDP, or All.
4.
Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list,
either TCP or UDP, or All.
5.
Select Enabled in Status field.
6.
Click the Save button to save the new rule.
Trigger Port - The port for outgoing traffic. An outgoing connection using this port will trigger
this rule.
Trigger Protocol - The protocol used for Trigger Ports, either TCP, UDP, or All (all
protocols supported by the router).
Archer C7
Figure 4-61 Port Triggering
Figure 4-62 Add or Modify a Triggering Entry
- 70 -
AC1750 Wireless Dual Band Gigabit Router
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer C7 AC1750 and is the answer not in the manual?
Questions and answers
I forgot my username and password for my AC1750 wireless router
To reset the username and password for the TP-Link Archer C7 AC1750 wireless router, follow these steps:
1. Reset to Factory Defaults: Press and hold the reset button on the router for about 10 seconds until the router restarts. This will restore all settings, including the username and password, to default values.
2. Default Login Credentials:
- Username: `admin`
- Password: `admin`
3. Change the Password:
- Log in to the router's web interface using the default credentials.
- Navigate to the settings menu where you can update the username and password.
- Enter a new password and save the changes.
Note: Resetting the router will erase all custom settings, including Wi-Fi names and passwords.
This answer is automatically generated
Laptop unable to access wifi
The TP-Link Archer C7 AC1750 is allowing your laptop to connect to WiFi, as shown by the laptop having an IP address (192.168.0.100) and being able to ping the router (192.168.0.1). However, access to the router's admin interface at http://192.168.0.1 times out. This issue is likely due to one of the following:
1. The router's web interface may be disabled or unresponsive.
2. A firewall or browser setting may be blocking access.
3. The router may need to be rebooted.
4. The connection may be on a guest network that blocks access to the admin page.
Try restarting the router, using a different browser or device, and ensuring you're connected to the main network, not a guest one.
This answer is automatically generated