TP-Link Archer C7 AC1750 User Manual page 31
Archer c7 ac1750 wireless dual band gigabit router
Hide thumbs
Also See for Archer C7 AC1750:
- Quick start manual ,
- Manual (9 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
Note:
Limited by local law regulations, version for North America does not have region
selection option.
Wireless Security
Disable Security - The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the router without encryption.
Enable Security (WPA-PSK/WPA2-PSK) – It's selected by default, with the
default PSK password the same as the default PIN code.
No Change - If you chose this option, wireless security configuration will not
change!
The above settings are only for basic wireless parameters. For advanced settings, please
check "More Advanced Wireless Settings", and then you can set the following parameters.
Band - This field displayed the operating frequency being configured.
Mode - This field determines the wireless mode which the router works on.
11an mixed - Select if you are using both 802.11a and 802.11n wireless clients.
11a/n/ac mixed – Select if you are using 802.11a, 802.11n and 802.11ac wireless
clients.
Channel - This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference problems with
another nearby access point. If you select "Auto", then the AP will select the best
channel automatically.
8.
Click the Finish button to complete the Quick Setup.
Archer C7
AC1750 Wireless Dual Band Gigabit Router
Figure 3-15 Quick Setup - Finish
- 20 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer C7 AC1750 and is the answer not in the manual?
Questions and answers
I forgot my username and password for my AC1750 wireless router
To reset the username and password for the TP-Link Archer C7 AC1750 wireless router, follow these steps:
1. Reset to Factory Defaults: Press and hold the reset button on the router for about 10 seconds until the router restarts. This will restore all settings, including the username and password, to default values.
2. Default Login Credentials:
- Username: `admin`
- Password: `admin`
3. Change the Password:
- Log in to the router's web interface using the default credentials.
- Navigate to the settings menu where you can update the username and password.
- Enter a new password and save the changes.
Note: Resetting the router will erase all custom settings, including Wi-Fi names and passwords.
This answer is automatically generated
Laptop unable to access wifi