No-Ip.com Ddns - TP-Link Archer C7 AC1750 User Manual
Archer c7 ac1750 wireless dual band gigabit router
Hide thumbs
Also See for Archer C7 AC1750:
- Quick start manual ,
- Manual (9 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
To set up for DDNS, follow these instructions:
1.
Enter the User Name for your DDNS account.
2.
Enter the Password for your DDNS account.
3.
Enter the Domain Name you received from dynamic DNS service provider.
4.
Click the Login button to login to the DDNS service.
Connection Status -The status of the DDNS service connection is displayed here.
Click Logout to logout of the DDNS service.
Note:
If you want to login again with another account after a successful login, please click the Logout
button, then input your new username and password and click the Login button.
4.19.3
No-ip.com DDNS
If the dynamic DNS Service Provider you select is www.no-ip.com, the page will appear as
shown in Figure 4-104.
Archer C7
Figure 4-103 Dyndns.org DDNS Settings
- 101 -
AC1750 Wireless Dual Band Gigabit Router
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Archer C7 AC1750 and is the answer not in the manual?
Questions and answers
I forgot my username and password for my AC1750 wireless router
To reset the username and password for the TP-Link Archer C7 AC1750 wireless router, follow these steps:
1. Reset to Factory Defaults: Press and hold the reset button on the router for about 10 seconds until the router restarts. This will restore all settings, including the username and password, to default values.
2. Default Login Credentials:
- Username: `admin`
- Password: `admin`
3. Change the Password:
- Log in to the router's web interface using the default credentials.
- Navigate to the settings menu where you can update the username and password.
- Enter a new password and save the changes.
Note: Resetting the router will erase all custom settings, including Wi-Fi names and passwords.
This answer is automatically generated
Laptop unable to access wifi
The TP-Link Archer C7 AC1750 is allowing your laptop to connect to WiFi, as shown by the laptop having an IP address (192.168.0.100) and being able to ping the router (192.168.0.1). However, access to the router's admin interface at http://192.168.0.1 times out. This issue is likely due to one of the following:
1. The router's web interface may be disabled or unresponsive.
2. A firewall or browser setting may be blocking access.
3. The router may need to be rebooted.
4. The connection may be on a guest network that blocks access to the admin page.
Try restarting the router, using a different browser or device, and ensuring you're connected to the main network, not a guest one.
This answer is automatically generated