TP-Link Archer C7 How To Set Up
Router with maxis fibre modem
Hide thumbs
Also See for Archer C7:
- Quick installation manual (147 pages) ,
- User manual (146 pages) ,
- Advanced configuration manual (3 pages)
Advertisement
Quick Links
How to setup TP-LINK router with Maxis Fibre modem? - Welcome to TP-LINK
[FAQ ID: 703]
Suitable for:
This article doesn't apply to TL-WR1043ND V1 and Archer C7 V1.
Note:Please prepare the Username and Password from Maxis for your internet service first.If you are not sure,please
contact Maxis to get the information.
Step 1Connect your computer to the LAN 2 or 3 port of the TP-LINK router. Connect the Maxis modem to the WAN
port of the TP-LINK router.
Step 2 Open the web browser and in the address bar type in http://tplinklogin.net. And then press Enter.
Step 3 Type the username and password in the login page. The default username and password both are admin.
Step 4 Click Quick Setup and click Next.Then Working Mode choose Maxis Mode and click Next.
http://www.tp-link.com/en/article/?faqid=703[16/11/2014 4:50:41 PM]
How to setup TP-LINK router with Maxis Fibre modem?
Archer C7, TL-WDR3600, TL-WDR4300, TL-WR1043ND, TL-WR841HP
Advertisement
Related Manuals for TP-Link Archer C7
Summary of Contents for TP-Link Archer C7
- Page 1 Note:Please prepare the Username and Password from Maxis for your internet service first.If you are not sure,please contact Maxis to get the information. Step 1Connect your computer to the LAN 2 or 3 port of the TP-LINK router. Connect the Maxis modem to the WAN port of the TP-LINK router.
- Page 2 How to setup TP-LINK router with Maxis Fibre modem? - Welcome to TP-LINK Step 5 This page is for setting up the VLAN of the IPTV and VOIP,don’t change anything and click Next. Note: Make sure IPTV VLAN ID is 823, if it’s 822 please change it to 823.
- Page 3 How to setup TP-LINK router with Maxis Fibre modem? - Welcome to TP-LINK Step 8 Click Reboot.Wait for the router to reboot itself ,at the meantime,please power cycle the Maxis modem. Step 9 After the modem and router are rebooted,please go to Status page,check WAN section,if the IP Address shows 0.0.0.0,please double check your Username and Password from Maxis and do the Quick Setup again.If it...
- Page 4 How to setup TP-LINK router with Maxis Fibre modem? - Welcome to TP-LINK Step 10 Connect your TV to LAN 1 and VOIP phone to LAN 4,try the services. Print E-mail Close Back to FAQ Views: 399 Copyright © 2014 TP-LINK Technologies Co., Ltd. All rights reserved.