Wireless Security - TP-Link TL-WR841N User Manual

Chapter4 Configure
• Key type - This option should be chosen according to the AP's security configuration.
lt is recommended that the security type is the same as your AP's security type.
• WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).
lt indicates the index of the WEP key.
• Auth Type - This option should be chosen if the key type is WEP (ASCII) or WEP {HEX).
lt indicates the authorization type of the Root AP.
• Password - If the AP your router is going to connect needs password, you need to fill
the password in this blank.
4. 4. 2. Wireless Security
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Wireless
>
Wireless Security.
3. Configure the the security settings of your wireless network and click Save.
W1 reless Secunty
Disable Security
@
WPA/WPA2 • Personal(Recommend ed)
Version:
~PSK -=--:;J
Encryption
1
AES •
1
Wireless Password:
~l
808_ 3 4 _ 60 _ 1
----~
(You can enter
ASC II
characters between 8 and 63 or Hexadecimal-characters between 8 and 64.)
Group Key Update Period:
1
0
1
Seconds
(Keep it defa ult ifyou are not sure, minimum is30, O means no update )
8
WPA/WPA2 • Enterprise
WEP
Version:
1
Automat1 c •
1
Encryption·
1
Automatic ..
1
Radius Server IP:
Radius Port
~(1 -fj5535,
0 standsfordefaultport 1812)
Radius Password:
Group Key Update Period:
[!C
J
(in second, minimum is 30, o means no update)
Type: [AUtômatic
-=--:;J
W'EP Key Format § xadecimal
~
Key Se lected WEP Key
Key 1:
Key2
Key 3:
Key4
Save
Key Type
1 Disabled • I
1
Disabled •
J
1
Disabled •
I
1
Disabled •
J
• Disable Security - The wireless security function can be enabled or disabled. If
disabled, wireless clients can connect to the router without a password. lt's strongly
recommended to choose one of the following modes to enable security.
• WPA-PSK/WPA2-Personal - lt's the WPA/WPA2 authentication type based on pre-
shared passphrase.
29