Starter Motor Removal - KYMCO ZX Service Manual

15
. ELECTRICAL EQUIPMENT
remove the starter relay.
Connect the starter relay green/yellow terminal
to the 12V battery positive (+) terminal and the
relay yellow/red terminal to the battery
negative (-) terminal. Check for continuity
between the starter relay red and red/white
terminals. The relay is normal if there is
continuity.

STARTER MOTOR REMOVAL

Disconnect the starter motor cable.
Remove the two bolts attaching the starter
motor and remove the starter motor.
The installation sequence is the reverse of
removal.
Starter Relay
Red Yellow/Red
Red/White Green/Yellow
Bolts
Starter Motor
STARTER MOTOR INSPECTION
Connect a battery across the starter motor and
check for its operation.
ZX / SCOUT
50
Starter Mo
15-12