Starter Motor - KYMCO X -Town 125 ABS Service Manual

19
. STARTING SYSTEM

STARTER MOTOR

INSPECTION
Disconnect the starter motor cable ( 2) from
the start relay(1).
Connect the start motor cable directly to the
battery positive terminal (3).
If the starter motor fail to work, the starter
motor is faulty.
REMOVAL
Turn the ignition switch turned to "OFF"
position.
Release the rubber cap (1) and remove the
terminal screw (2) to disconnect the start
motor cable from the start motor.
Remove two mounting bolts (3) , then
remove the start motor.
19-3
(1)
(2)
X -Town 125 ABS/ CBS
(3)
(1)
(2)
(3)