Gehl RT175 Operator's Manual page 53

Table 24: Status, Maintenance and Error Code Screens
Screen
Required Maintenance and Error Code Screens
NOTE:
Error codes remain displayed after the error is corrected. Press the display several times to rotate
through all display screens to refresh the display; corrected error codes will not reappear in the screen
rotation.
Printed in U.S.A.
Access/Description
Low Fuel Screen
Automatically displays when the fuel level is low.
Maintenance Required Screen
Displays in the screen rotation along with status screens when scheduled
maintenance is required. See page "Maintenance Schedule" on page 100.
To dismiss this screen, press and hold the interface button (Z, Fig. 7). This
screen will display in rotation when scrolling through the status screens. After 1
full rotation of all screens, the display will freeze on this screen, until the machine
is shut-down and started back up.
Engine Error Code Screen
Displays in the screen rotation along with status screens when engine errors
occur. See "Engine Error Codes" on page 140.
Up to 3 errors can be displayed on a single screen; additional screens are
displayed if more than 3 errors occur.
The error code screen is dismissed when the underlying problem is solved --
error code screens take precedence over other screens.
Drive / Valve Error Code Screen
Displays in the screen rotation along with status screens when drive / valve
system errors occurs. Up to nine drive / valve error codes can be displayed. See
"Drive and Valve Error Codes" on page 142.
Limp Mode Activated Screen
Limp mode allows limited drive function when drive system errors (3-10) occur
which disable able the drive system for safety reasons. Two limp mode codes
can be displayed –"38" and "39". See "Travel Drive Error Condition Operation
(Limp Mode)" on page 75.
Module Communication Error Code Screen
Displays in the screen rotation along with status screens when module
communication errors occurs. Up to nine module communication error codes can
be displayed.
47
Controls
918468/EP0313