Configuration Screens - Gehl RT175 Operator's Manual

Controls

Configuration Screens

Table 25: Configuration Screens
Item
Configuration Selection Screens
A
Configuration Screens
918468/EP0313
Access/Description
Configuration Selection Screens
To access these screens, press and hold interface button (Z, Fig. 7) for 5 seconds.
Press and release interface button (Z, Fig. 7) to move selection caret (A) down
through the configuration selections. Press and hold interface button for 5 seconds
to go to the configuration screen selected by selection caret (A).
To exit the configuration selection screens, move selection caret (A) to the "EXIT"
option and press and hold interface button for 5 seconds.
Control Sensitivity Configuration Screen
To change joystick control sensitivity, press and release interface button (Z, Fig. 7)
to scroll through selections and change control sensitivity. With the caret closer to
the symbol, joystick control becomes increasingly aggressive and immediate;
with the caret closer to the
and more relaxed.
Control sensitivity configuration changes are saved when exiting this screen. To exit
this screen, press and hold interface button for 5 seconds.
Travel Speed Limit Configuration Screen (Option)
This screen displays only on machines equipped with the speed limit option. Press
and release interface button (Z, Fig. 7) to choose between H-L (high/low) or speed
limit travel drive modes. See "Travel Speed Range Selection" on page 57 for more
information about the travel speed limit option.
Vehicle speed limit configuration changes are saved when exiting this screen. To
exit this screen, press and hold interface button for 5 seconds.
Control Joystick ISO/D-H Pattern Selection Screen (Option)
This screen displays only on machines equipped with the D-H control pattern
option. Press and release interface button (Z, Fig. 7) to choose between ISO or D-H
joystick control options. See "Control Joysticks" on page 50 for more information
about the ISO and D-H control options.
Control joystick pattern configuration changes are saved when exiting this screen.
To exit this screen, press and hold interface button for 5 seconds.
Coolant Temperature °F/°C Units Selection Screen
Press and release interface button (Z, Fig. 7) to choose between coolant
temperature display options (°F/°C).
Coolant temperature units configuration changes are saved when exiting this
screen. To exit this screen, press and hold interface button for 5 seconds.
48
symbol, joystick control becomes less aggressive
Printed in U.S.A.