Work Lights; Battery Disconnect Switch (Option) - Gehl RT175 Operator's Manual

Controls

Work Lights

The switches for the work lights are located on the
right console.
Work Lights
WARNING
Switch off the work lights when traveling on
public roads. Work lights can dazzle motorists
and cause accidents.
The front and back work lights operate using the
same 3-position switch (Y, Fig 32).
Set switch (Y) to the middle position (V) to turn on
the front work lights.
Set switch (Y) to the top (Z) position to turn both the
front and back work lights on.
Set switch (Y) to the bottom (X) position to turn the
work lights off.
NOTE:
Indicator (W) is on when the works lights
are activated.
to
Z
V
Y
X
Fig. 32 – Work Light Switch
918468/EP0313
Battery Disconnect Switch
(Option)
D
Fig. 33 – Battery Disconnect Switch
Before the engine can be started, the battery
disconnect switch must be in the "on" position.The
battery disconnect switch (A, Fig 33) is located
inside the battery compartment in the back left
corner of the machine.
Open the battery compartment using the key
supplied with the ignition key in lock (C). Open the
battery compartment cover and prop the cover open
using pin (D).
Always prop the battery compartment cover
open using pin (D). Severe injuries can result if
the battery compartment cover falls on hands
and/or fingers.
W
To disconnect the battery from the electrical
system and disable all electrical functions: Turn
the switch counter-clockwise to the "OFF" position.
To connect the battery to the electrical system
and enable all electrical functions: Turn the
switch clockwise to the "ON" position.
60
A
C
CAUTION
Printed in U.S.A.