Parking Brake/Work Hydraulics Lock-Out; Cab Heat And Air Conditioning (Option) - Gehl RT175 Operator's Manual

Controls
Parking Brake/Work Hydraulics
Lock-out
The parking brake is automatically applied
whenever either of the safety bars/arm rests are in
the raised position (B, Fig 19).
NOTE:
Raising the safety bars/arm rests also
locks out work hydraulic functions.
Fig. 19 – Safety Bars/Arm Rests in Raised
Position
NOTE:
The parking brake is also applied
whenever the operator leaves the seat, or if the cab
door is opened.
IMPORTANT:
The engine cannot be started with
the safety bars/arm rests in the raised position, if
the operator is not in the operator's seat, or if the
cab door is not closed.
918468/EP0313
B
Cab Heat and Air Conditioning
(Option)
Controls for cab heat and air conditioning are
located on the left control panel. The same controls
are used to control both heating and air
conditioning.
Control the heat/air conditioning fan using knob
(A). Turning the switch clockwise increases fan
speed; counter-clockwise decreases fan speed; all
the way counter-clockwise turns heat/air
conditioning off.
Control the heat/air conditioning output temperature
using knob (B). Turn the switch clockwise for
warmer temperature; counter-clockwise for cooler
temperature.
Fig. 20 – Cab Heat and Air Conditioning Controls
54
A
B
Printed in U.S.A.