New Decal Application - Gehl RT175 Operator's Manual

Safety

New Decal Application

• Surfaces must be free of dirt, dust, grease and
foreign material before applying the decal.
Remove the smaller portion of the decal backing
paper and apply the exposed adhesive to the
clean surface, maintaining proper position and
alignment. Peel the rest of the backing paper and
C
D
Front
Fig. 3 – Safety Decal Locations
918468/EP0313
F
H
View from Operator's
apply hand pressure to smooth out the decal sur-
face. Refer to the following pages for proper
decal locations.
• If replacing a part that has a decal on it, ensure
that the replacement part has the same decal.
G
E
I
Position
26
On bottom of raised
platform
C
J
Back - Engine
Compartment Open
Printed in U.S.A.
A
B