Leakage Check; Lubrication And Filter Changes; Functional Check - Gehl RT175 Operator's Manual

Leakage Check

Table 35: Leakage Check
Service Procedure
Check engine for oil/coolant leaks
Check cooling system for leaks
Check hydraulic system for leaks

Lubrication and Filter Changes

Table 36: Lubrication and Filter Changes
Service Procedure
Lubricate grease fittings according to lubrication diagram (See Fig.
110 on page 119)
Travel motor gear oil
Change engine oil/filter
Change cab air filter, if applicable
Lubricate all levers, cables and hinges with oil
Change outer air cleaner filter element; check and change inner air
cleaner element if necessary
Change hydraulic oil and return filter
Change fuel filter; clean pre-filter
Change coolant
1. After first 150 hours; every 1000 hours thereafter
2. After first 50 hours; every 250 hours thereafter.
3. Replace if needed.

Functional Check

Table 37: Functional Check
Service Procedure
Check seat belt
Check service and parking brake function
Check joystick operation
Check windshield wipers, if applicable
Check control switches/buttons, indicators and audible warning devices
Check installed lighting systems
Printed in U.S.A.
10 Hours
(or daily)
10 Hours 150 Hours
(or daily) (or every 4
months)
X
10 Hours
(or daily)
101
Maintenance
Maximum Interval
250 Hours
(or every 6 (or annually)
months)
X
X
X
Maximum Interval
250 Hours
(or every 6 (or annually)
months)
1
X
2
X
3
X
X
3
X
X
X
Maximum Interval
250 Hours
(or every 6 (or annually)
months)
X
X
X
X
X
X
918468/EP0313
500 Hours
500 Hours
X
500 Hours