Safety Instructions When Working With Buckets - Gehl RT175 Operator's Manual

Operation
Safety Instructions When Working with
Buckets
WARNING
Avoid tilting a bucket back when the lift arm is
fully raised. Material may fall over the rear of the
bucket and onto the operator's position.
When on slopes, always set the lift arm to the
transport position ("Attachment Transport
Position" on page 76) and tilt the bucket fully
back.
Secure heavy or awkward loads. If necessary, fit
the rear of the bucket with a guard to prevent
material from falling out of the back of the
bucket.
Whenever possible, drive in reverse when
transporting a bucket loaded with material down
a steep slope.
Make sure you have a good view of the material
you are digging, and of the area you will be
working in.
918468/EP0313 88 Printed in U.S.A.