Operation; Operational Checks; Pre-Start Checks - Gehl RT175 Operator's Manual

WARNING
Read and understand this entire manual. Follow
warnings and instructions for operation and
maintenance. Failure to follow instructions can
result in injury or death.
Read and understand all safety decals before
operating the machine. DO NOT operate the
machine unless all factory-installed guards and
shields are in place.
Be sure you are familiar with all safety devices
and controls before operating the machine.
Know how to stop the machine before starting.
Use only Manitou-approved accessories or
referral attachments. Manitou Americas, Inc.
cannot be responsible for safety if the machine
is used with non-approved accessories or
attachments.
Check for correct function after adjustments or
maintenance.

Operational Checks

Pre-Start Checks

Complete these checks before starting the engine
and using the machine. Repair any problems before
using the machine.
Table 31: Pre-Start Checks
Check
Fuel tank filled?
Engine oil level correct?
Hydraulic system oil level correct?
Engine coolant level correct?
Printed in U.S.A.

Operation

Refer To:
"Adding Fuel" on
page 110
"Checking Engine Oil
Level" on page 104
"Checking Hydraulic Oil
Level" on page 112
"Checking Coolant Level"
on page 107
Table 31: Pre-Start Checks
Check
Windshield washer reservoir
filled?
Grease fittings properly
lubricated?
V-belt condition good/tension
adjustment correct?
Track condition good
Lights, signals, indicators,
warning lights, indicators and horn
operating properly?
Windows, lights and steps clean?
Attachment securely fastened to
hitch?
Overall machine condition
(including attachments) for bends,
cracks, broken or missing parts,
etc.
Engine cover securely closed and
latched?
Rags, tools, debris and other
loose objects removed? (check
especially after maintenance)
Approved warning triangle,
hazard warning light and first aid
kit in the machine?
Seat position correctly adjusted?
Seat belt fastened?
Parking brake applied?
63
Refer To:
"Windshield Washer
Reservoir" on page 127
"General Lubrication" on
page 119
"Checking and Adjusting
V-belt Tension" on
page 109
"Work Lights" on page 60
"Connecting Attachments"
on page 83
"Engine Access" on
page 103
If required by local
regulations
"Seat Adjustment" on
page 65
"Seat Belt" on page 65
"Parking Brake" on
page 66
918468/EP0313