Switches/Indicators - Gehl RT175 Operator's Manual

Switches/Indicators

A
F
Fig. 6 – Switches/Indicators
Table 23: Switches/Indicators
No Item
A Power-A-Tach®
B Parking Brake
C Heat/Air Conditioning (HVAC)
D Front Windshield Wiper/Washer (option)
E Rear Windshield Wiper/Washer
F Auxiliary High-Flow Hydraulics
G Self-Leveling Cancel (option)
H Work Lights
Printed in U.S.A.
B
H
G
Description
Located on left panel. Press and hold bottom of switch to lock attachment
onto the Power-A-Tach® quick attach system hitch; press and hold top of
switch to unlock the attachment.
See "Connecting/Disconnecting Attachments" on page 83.
Press top of switch to apply parking brake. Press and hold top of switch to
release parking brake.
Indicator in switch is lit when parking brake is applied.
IMPORTANT:
safety bar/arm rests are in the raised position, operator is not
in seat and door (if equipped) is opened.
Located on left panel. See "Cab Heat and Air Conditioning (Option)" on
page 54.
Press bottom of switch to activate front windshield wiper; press and release
top of switch to deactivate.
Press and hold top of switch to operate front windshield washer spray.
Indicator in switch is lit when front windshield wiper is activated.
Press bottom of switch to activate rear windshield wiper; press and release
top of switch to deactivate.
Press and hold top of switch to operate rear windshield washer spray.
Indicator in switch is lit when rear windshield wiper is activated.
See "Auxiliary Hydraulics Operation" on page 86.
Press top of switch to deactivate self-leveling; press bottom of switch to
restore the self-leveling function.
Indicator in switch is lit when self-leveling is deactivated.
Move switch to the middle position to activate the front work lights; press the
top of switch to activate both the front and rear work lights; press bottom of
switch to deactivate work lights. See "Work Lights" on page 60
Indicator in switch is lit when work lights are on.
C
D
Parking brake is applied when either, or both,
45
Controls
E
918468/EP0313