Audible Alerts; Control Joysticks; Joystick Tilt Function Iso/D-H Control Patterns; Activating D-H Control Pattern Option - Gehl RT175 Operator's Manual

Controls

Audible Alerts

The multi-function display screens also emits audible alerts (buzzer) under the following conditions:
Table 26: Audible Alerts
Item
4 Hz alarm – 5 seconds
2 Hz alarm

Control Joysticks

The control joystick forward and back, and right to
left tilting movements perform the following
functions:
• Track drive control
• Lift arm raise/lower and attachment tilt
Buttons and switches on the control joysticks
perform the following functions:
• High/low speed mode control
• Lift arm float activation/deactivation
• Hydraglide activation/deactivation (optional)
TM
• Horn operation
• Auxiliary hydraulics flow control (momentary
and continuous)

Joystick Tilt Function ISO/D-H Control Patterns

Control joystick functions are factory-configured to
follow ISO-pattern controls. An optional additional
D-H control pattern factory option is available.
Machines equipped with the optional D-H control
pattern can switch between ISO and D-H control
pattern functionality using the multi-function
display control joystick ISO/D-H pattern selection
screen.
918468/EP0313
Description
When ignition is activated.
Engine temperature too high.
Engine oil pressure too low.
Hydraulic oil temperature too high
Low battery / charging fault.

Activating D-H Control Pattern Option

NOTE:
D-H control pattern will not display the control
joystick ISO/D-H pattern selection screen.
1. Hold down the interface button (Z, Fig 8) on the
multi-function display for 5 seconds.
Fig. 8 – Multi-Function Display Interface Button
2. Press and release the interface button until the
selection caret points to the "ISO/D-H" selection
(Y, Fig 9). Press and hold the interface button for
5 seconds.
Fig. 9 – ISO/D-H Control Pattern Configuration
50
Machines not equipped with the optional
Y
Selection
Z
Printed in U.S.A.