Self-Leveling Cancel (Option); Lift Arm Float; Hydraglide™ Ride Control System (Option) - Gehl RT175 Operator's Manual

Self-Leveling Cancel (Option)

The self-leveling cancel option allows deactivation
of the self-leveling feature.
To deactivate self-leveling, press the top (G, Fig.
53) of the self-leveling cancel switch (K). To restore
self-leveling, press the bottom (J) of the self-
leveling cancel switch.
NOTE:
The indicator in the switch is lit when
the self-leveling cancel option is on and the self-
leveling feature is deactivated.
G
K
J
Fig. 53 – Self-Leveling Cancel Switch (Option)

Lift Arm Float

WARNING
Make sure the bucket is lowered to the ground
before activating the lift arm float. Activating
float with an attachment raised will cause the lift
arm to fall rapidly to the ground, which can
cause severe injury or death.
Do not drive the loader forward with the lift arm
float activated. Damage to the machine and/or
loss of control can result.
To activate lift arm float:
1. Lower the attachment to the ground.
2. Press button (A, Fig. 54) on the right joystick to
activate float:
Printed in U.S.A.
a. Press button (A, Fig. 54) momentarily to
b. Press and hold button (A, Fig. 54) on the
NOTE:
display is lit when the lift arm float is activated.
Indicator (B) blinks when momentary float is
activated and is continuously lit when
continuous float is activated.
Press button (A) again to deactivate continuous
float.
L
Fig. 54 – Lift Arm Float Buttons/Indicator
Hydraglide™ Ride Control Sys-
tem (Option)
Hydraglide™ cushions and dampens the movements
of the lift arm. It eliminates unstable lift arm
oscillation and increases drive comfort and safety.
IMPORTANT:
ging. Precise control of the digging operation is diffi-
cult with the Hydraglide™ option activated.
Do not use Hydraglide™ when using pallet
forks.
79
apply float momentarily.
right joystick for 5 seconds to activate
continuous float.
Indicator (B) in the multi-function
A
Do not use Hydraglide™ when dig-
WARNING
Operation
A
B
918468/EP0313