Parking Brake; Disengage Parking Brake - Gehl RT175 Operator's Manual

Operation
WARNING
If the seat belt spool does not retract the slack
in the seat belt, have it serviced immediately. Do
not operate the machine if the seat belt is not
fastened and working properly.
NOTE:
Unfasten the seatbelt by pressing
button (C).

Parking Brake

The parking is automatically applied whenever
either of the safety bars/arm rests are in the raised
position (B, Fig 39), the operator leaves the seat or
the cab front door is opened.
Before starting the engine, sit in the operator's seat
and lower the safety bars/arm rests. On machines
equipped with a cab, close the door.
NOTE:
Raising the safety bars/arm rests,
leaving the operator's sear or opening the cab
door also locks out work hydraulic functions,
with the exception of standard auxiliary
hydraulics continuous flow.
Fig. 39 – Safety Bars/Arm Rests in Raised
Position
IMPORTANT:
The engine cannot be started if the
safety bars/arm rests are in the raised position, the
cab door is open or the operator in not in the seat.
918468/EP0313
B

Disengage Parking Brake

1. Sit in the operator's seat and fasten the seat belt.
2. Close the cab door, if equipped.
3. Lower the safety bars/arm rests.
4. Start the engine.
NOTE:
If the engine does not start due to
failure to perform any of steps 1-3, the error
code "0" is displayed on the multi-function
display.
5. Press and hold the top of the parking brake
switch (C, Fig 40) for several seconds until the
indicator lights in the switch and on the multi-
function display go out.
C
Fig. 40 – Parking Brake Indicators/Disengage
Switch
66 Printed in U.S.A.