Engine - Gehl RT175 Operator's Manual

Specifications

Engine

Table 9: Engine
Engine Model
Design
Displacement
Bore and Stroke
Compression Ratio
Gross Power
Net Power
Peak Torque
Low/High Idle
Rated - Full Load Speed
Fuel Injection System
Fuel Delivery
Fuel Shut-off
Fuel Filtering
Estimated Fuel Consumption - Average
Load
Firing Order
Normal Starting Aid
Cold Starting Aid (Optional)
Lubrication
Crankcase Ventilation
Max. Inclined Angle (engine still supplied
with oil)
Cooling System
Permissible Coolant Temperature
Thermostat Rating
Permissible Coolant Temp
Fan Type / Ratio
Exhaust Emission Compliance
Starter - Power
Alternator Voltage / Amperage
Operating Range– Ambient Temperature
1. Operation above temperature range may result in overheating; operation below temperature range may result in hard-starting. Con-
tact your dealer before operating the machine outside temperature range.
918468/EP0313
RT175
Yanmar 4TNV98-ZNMS
In-line 4 cylinder, 4-stroke diesel,
naturally aspirated
18.5 : 1
52.1 kW (69.9 hp) @ 2500 rpm
51.0 kW (68.4 hp) @ 2500 rpm
242.7 Nm (179 lb.-ft..) @ 1600 rpm
In-line filter cartridge w/water trap and replaceable element
@ Rated - full load speed 14.4 L/hr (3.8
gph) / @ Rated - 55% load speed 7.8 L/hr
(2.1 gph)
82° C (180°F) cracking / 95° C (203°F) full open
1
36
RT210
Yanmar 4TNV98T-ZXNMS
In-line 4 cylinder, 4-stroke diesel,
3.319 L (203 cu. in.)
98 x 110 mm (3.8 x 4.3 in.)
18.1 : 1
53.7 kW (72.0 hp) @ 2500 rpm
52.7 kW (70.7 hp) @ 2500 rpm
279.3 Nm (206 lb.-ft.) @ 1800 rpm
1000 / 2530 rpm
2500 rpm
Direct injection
In-line injection pump
On injection pump
@ Rated - full load speed 15.1 L/hr (4.0
gph) / @ Rated - 55% load speed 8.3 L/hr
(2.2 gph)
1-3-4-2
500W manifold heater
400W block heater
Pressure system w/replaceable filter
External
30° in all directions
Water / glycol
110° C (230°F)
110°C (230°F)
Pusher / 1:0.9
Tier 3 / 4i
3 kW - 12 V
12 V / 95 A
-15°C (+5°F) – +45°C (+113°F)
turbocharged
Printed in U.S.A.