Joystick Control Sensitivity; Configuring Control Sensitivity - Gehl RT175 Operator's Manual

Joystick Control Sensitivity

The sensitivity of the ISO drive controls can be
configured to be more or less aggressive/immediate.
Five levels of control sensitivity are available.

Configuring Control Sensitivity

1. Hold down the interface button (Z, Fig 15) on
the multi-function display for 5 seconds.
Fig. 15 – Multi-Function Display Interface Button
2. Press and release the interface button until the
selection caret points to the
sensitivity selection (Y, Fig 16). Press and hold
the interface button for 5 seconds.
Fig. 16 – Control Sensitivity Configuration
Selection
3. Press and release the interface button as required
to select the desired level of control sensitivity
(Fig 17). Five levels of control sensitivity are
available.
Move the selection caret toward the top of the
screen (V [ ]) for more aggressive and
immediate control sensitivity; move the selection
caret toward the bottom of the screen (X [
for less aggressive and more relaxed control
sensitivity.
Press and hold the interface button for 5 seconds
to save control sensitivity configuration changes.
Printed in U.S.A.
Z
/ control
Y
Fig. 17 – Control Sensitivity Selection Screen
4. Press and release the interface button until the
selection caret points to the "EXIT" selection
(W, Fig 28). Press and hold the interface button
for 5 seconds. The currently selected control
sensitivity is now activated.
Fig. 18 – Exit Configuration Mode
])
53
Controls
More
V
Aggressive/
Immediate
X
Less
Aggressive/
More Relaxed
W
918468/EP0313