Outside Air Intake Filter; Windshield Washer Reservoir - Gehl RT175 Operator's Manual

Outside Air Intake Filter

1. Perform the "Mandatory Safety Shutdown Pro-
cedure" on page 16.
2. Remove hardware (F, Fig. 122) securing the
outside air filter cover (G). Remove cover (G).
3. Remove old air filter (H)
4. Install new air filter (H), positioned so the side
with the metal grate (Z) faces in.
5. If necessary, apply foam strips (I) to the outside
edges of new air filter to provide a good seal.
6. Replace cover (H) and secure with hardware (F)
F
Fig. 122 – Air Conditioning Outside Air Intake
Filter
Printed in U.S.A.
G
H
Z
I

Windshield Washer Reservoir

The windshield washer reservoir (R, Fig. 123) is
located inside the engine compartment on the right.
Check the windshield washer reservoir level daily
before starting the machine and fill if necessary.
Fig. 123 – Windshield Washer Reservoir
IMPORTANT:
Fill the windshield washer fluid res-
ervoir with clean tap water only. Add a cleaning
agent if required. Add antifreeze to the water in cold
weather.
127
Maintenance
R
918468/EP0313