Grading Using Float
WARNING
Make sure the bucket is lowered to the ground
before activating the lift arm float. Activating
float with an attachment raised will cause it to
fall rapidly to the ground, which can cause
severe injury or death.
Do not drive the loader forward with the lift arm
float activated. Damage to the machine and/or
loss of control can result.
1. Lower the bucket to the ground (Fig. 74).
1
3
Fig. 74 – Leveling Using Float
2. Press button (A, Fig. 75) on the right control
joystick to activate the lift arm float. See "Lift
Arm Float" on page 79 for more information
about the float feature.
NOTE:
Indicator (B) in the multi-function dis-
play is lit when the lift arm float is activated. Indi-
cator (B) blinks when momentary float is
activated and is continuously lit when continu-
ous float is activated.
Printed in U.S.A.
Fig. 75 – Lift Arm Float Buttons/Indicator
3. Tilt the bucket forward so it stands on the
cutting edge (Fig. 74).
4. Drive in reverse, dragging the floating bucket.
5. When finished, press button (A, Fig. 75) again
to deactivate the lift arm float.
2
4
91
A
Operation
A
B
918468/EP0313