Scanning To Trace Background Image; Scanning With An Embroidery Frame - Brother 882-W20/W22 Operation Manual

c
Attach the embroidery unit to the machine,
and then turn on the machine.
* Refer to "Attaching the Embroidery Unit" on
page 211.
Note
• Unthread the machine to avoid having the
thread slipping out of the needle or getting
caught on the embroidery frame.
d
Press the "Presser Foot Lifter" button to
raise the presser foot, and then press the
"Needle Position" button to raise the
needle.
* The presser foot is not raised high enough when
raised with the presser foot lever.
CAUTION
• If you want to scan the small piece of paper
that cannot be placed with the magnets, copy
the image on the paper to the larger paper and
place on the scan frame.
Note
• Make sure that presser foot and needle are
fully raised. If scanning is started with the
presser foot and needle lowered, the
scanning frame may hit the machine,
causing damage.
e
After attaching the scanning frame to the
embroidery unit, swing the frame-securing
lever toward you to secure the frame.
* *Refer to "ATTACHING THE EMBROIDERY
FRAME" on page 261.
MY DESIGN CENTER WITH SCAN
Note
• Unthread the machine to avoid having the
thread slipping out of the needle or getting
caught on the embroidery frame.
• Be sure not to attach the presser foot other
than the embroidery foot "W+" or "W",
otherwise the presser foot will be scanned.

■ Scanning with an Embroidery Frame

Drawings and illustrations can also be scanned
using an embroidery frame. Hoop the embroidery
frame with fabric larger than the frame. Place the
paper to be scanned on the fabric, and then secure it
with tape.
When not using the scanning frame, prepare a line
drawing that can easily be scanned.
a Fabric
b Tape
Scanning to Trace Background
Image
If you have a favorite picture or drawing, it can
easily be traced on the scanned background image
and you can create your own pattern.
a
Press .
8
351