Sewing Split Embroidery Patterns - Brother 882-W20/W22 Operation Manual

f
Reattach the embroidery frame to the
embroidery unit, and embroider the satin
stitch pattern to create an appliqué.

Sewing Split Embroidery Patterns

Split embroidery patterns created with PE-DESIGN
Ver.7 or later can be sewn. With split embroidery
patterns, embroidery designs larger than the
embroidery hoop are divided into multiple
sections, which combine to create a single pattern
after each section is sewn.
For details on creating split embroidery patterns
and for more detailed sewing instructions, refer to
the operation manual included with PE-DESIGN
Ver.7 or later.
The following procedure describes how to read
the split embroidery pattern shown below from
USB media and embroider it.
EMBROIDERY APPLICATIONS
a
Connect to the machine the media
containing the created split embroidery
pattern, and then select the split
embroidery pattern to be embroidered.
* For details on recalling patterns, refer to "Selecting
Patterns from Embroidery Cards" on page 219,
"Recalling from USB Media" on page 221, or
"Recalling from the Computer" on page 222.
→ A screen appears so that a section of the split
embroidery pattern can be selected.
b
Select section
* Select the sections in alphabetical order.
* A maximum of 12 sections can be displayed in one
page. If there are 13 or more sections in the pattern,
press or to display the previous or next
page.
g5901.eps
to be embroidered.
7
319