Specify Fabric Display From The Settings Screen; Saving Scanned Image To Usb Media - Brother 882-W20/W22 Operation Manual

VARIOUS EMBROIDERING FUNCTIONS
g
Use to align the pattern to the desired
embroidery position.
h
Press .
Memo
• If necessary, press
order to check the pattern position.
i
Press the "Start/Stop" button to start
embroidering.
* See "Embroidering Patterns" on page 274.
→ When embroidery is finished, the fabric displayed in
the background disappears.
288
to display a preview in
■ Specify Fabric Display from the
Settings Screen
Whether the fabric disappears or remains displayed
can be specified from the settings screen.
a Set to "ON" to leave the fabric displayed in the
background.
b When set to "OFF", the background will disappear.
c Set to "Fine" to scan clearer than setting to "Standard".
d Press
to remove the background image
completely.
Note
• The fabric background will remain if the embroidery
is not finished. In this case, erase the background
image from the settings screen.

■ Saving Scanned Image to USB Media

a
Insert the USB media into the USB port on
the machine.
a USB port
b USB media
a
b
c
d