Using The Automatic Thread Cutting Function (End Color Trim); Using The Thread Trimming Function (Jump Stitch Trim); Using The Automatic Thread Cutting Function; (End Color Trim) - Brother 882-W20/W22 Operation Manual

MAKING EMBROIDERY ADJUSTMENTS
Using the Automatic Thread
Cutting Function (End Color
Trim)
The automatic thread cutting function
cut the thread at the end of sewing each color.
This function is initially turned on. To turn this
function off, press
function can be turned on or off during
embroidering.
* This setting returns to its default
when the machine is turned off.
a
Press .
b
Press
thread cutting function.
→ The key will display as
* When one color thread is sewn, the machine will
stop without cutting the thread.
304
key and then
to turn off the automatic
.
Using the Thread Trimming
Function (Jump Stitch Trim)
The thread trimming function
automatically trim any excess thread jumps within
will
the color. This function is initially turned on. To
turn this function off, press
. This function can be turned on or off
. This
during embroidering.
* Your customized setting remains after turning the
machine off and on.
a Jump stitch
Note
• When this function is turned on, use the
included ball point needle 75/11 for
embroidering patterns with short jump
stitches such as alphabet characters. Using
other needles may cause the thread to
break.
a
Press
will
key and then
.