Brother 882-W20/W22 Operation Manual page 81

3. Affix white sticker on needle dropping
point area.
a White sticker
Note
• Use a new sticker. The camera needle
position cannot be set correctly if there is a
hole in sticker or if it is dirty. If you have no
new stickers, contact your nearest
authorized Brother dealer.
4. Press to initiate the calibration
process. For safety please make sure area
around needle is clear prior to pressing
.
→ Setting the needle drop point begins.
NEEDLE CALIBRATION USING THE BUILT IN CAMERA
d
The operation is finished when "OK"
appears. If "NG" appears, remove the
sticker, and then follow the on-screen
instructions to repeat steps 3 and 4 of
c
step . If multiple attempts to set the
position are not successful, contact your
nearest authorized Brother dealer.
e
Remove the sticker, and then turn off the
machine.
1
79