Connecting Patterns To Be Joined Along An Edge; Measuring The Distance That The Pattern Will Be Slid - Brother 882-W20/W22 Operation Manual

CONNECTING ROTATED PATTERNS
l
Continue with step
Three Patterns" to finish connecting the
patterns.
Connecting Patterns to be Joined
Along an Edge
Greater design variations can be created by sliding
the patterns being connected.
The following procedure describes how to use this
function to connect patterns so they are joined
along an edge. Before connecting the patterns, the
basting function will be used to measure the
distance that the pattern will be slid.
A: First pattern
B: Second pattern
■ Measuring the Distance That the
Pattern Will Be Slid
a
Set "Embroidery Basting Distance" in the
settings screen to "0.0".
332
m
of "Connecting
b
Select the pattern whose slide distance is to
be measured.
c
Continue to the embroidery screen, and
press and then, press
select the basting function.
→
changes to
to
.