Affixing The Appliqué Piece To The Base Fabric - Brother 882-W20/W22 Operation Manual

EMBROIDERING AN PATTERN
b
Thread the machine with the embroidery
thread, lower the presser foot lever, and
then press the "Start/Stop" button to sew
the appliqué position.
→ The position of the appliqué is sewn, and then the
machine stops.
a Appliqué position
b Base fabric
c
Remove the embroidery frame from the
embroidery unit.
Note
• Do not remove the base fabric from the
embroidery frame until all sewing is finished.
■ 3. Affixing the Appliqué Piece to the
Base Fabric
a
Lightly apply craft glue to the back of the
appliqué piece, and then attach it to the
base fabric within the outline of the
position sewn in step
Appliqué Position on the Base Fabric".
278
b
of "2. Sewing the
Note
• If the appliqué piece is not securely
attached to the base fabric, the appliqué
piece may lift off the base fabric during
sewing, causing misalignment.
• If the appliqué piece cannot be attached to
the base fabric with craft glue, securely
baste it in place with basting stitches.
• If thin fabric is used for the appliqué piece,
reinforce and secure it in place with an iron-
on adhesive sheet. An iron can be used to
attach the appliqué piece to the appliqué
location.
• Do not remove the fabric from the
embroidery frame when attaching the
appliqué piece to the base fabric.
b
After the appliqué piece is attached, attach
the embroidery frame to the machine.
Thread the machine with the embroidery thread, lower
the presser foot lever, and then press the "Start/Stop"
button to sew the appliqué.
→ The appliqué piece is sewn to the base fabric, and
then the machine stops.
Memo
• Depending on the pattern that is selected,
(appliqué piece),
(appliqué position) and
for all three steps may not appear. If
(appliqué) appears as a color,
embroider using thread of that color.
(appliqué)