Upper Threading; Upper Threading - Brother 882-W20/W22 Operation Manual

UPPER THREADING

UPPER THREADING

Upper Threading

CAUTION
• Be sure to thread the machine properly.
Improper threading can cause the thread to
tangle and break the needle, leading to injury.
• When using the walking foot, the side cutter or
accessories not included with this machine,
attach the accessory to the machine after
threading the machine.
Memo
• The automatic threading function can be
used with sewing machine needle sizes 75/
11 through 100/16.
• When threads such as transparent nylon
monofilament or speciality threads are used
it is not recommended to use the needle
threader.
• The automatic threading function cannot be
used with the wing needle or the twin
needle.
a
Turn the main power to ON.
b
Press the "Presser Foot Lifter" button to
raise the presser foot.
62
→ The upper thread shutter opens so the machine can
be threaded.
a Upper thread shutter
Memo
• This machine is equipped with an upper
thread shutter, allowing you to check that
the upper threading is performed correctly.
c
Press the "Needle Position" button to raise
the needle.
Note
• If you try to thread the needle automatically
without raising the needle, the thread may
not thread correctly.
d
Pivot the spool pin so that it angles upward.
Set the thread spool on the spool pin so that
the thread unwinds from the front of the
spool.
a Spool pin
b Spool cap
c Thread spool
d Spool felt