Brother 882-W20/W22 Operation Manual page 330

USING THE CAMERA TO CONNECT PATTERNS
b
Following message appears in step
next pattern or affixed positioning stickers
are close to being out of the embroidering
area. Follow the instructions and then press
.
a Embroidering area
a Pattern to be embroidered next
b Embroidery sheet
328
p
if the
Note
• If the following message appears, rehoop
the fabric as indicated in the screen, and
then press
a
c
After the sticker position is detected, press
d
Affix the two positioning stickers again
according to the on-screen instructions so
that the next pattern or positioning marks
can fit in the embroidery area.
→ Press
positioning sticker.
.
, and then remove the stickers.
so that the camera detects the first