Brother 882-W20/W22 Operation Manual page 294

VARIOUS EMBROIDERING FUNCTIONS
f
Press
position the satin stitching around design.
Note
• When
to the center. After selecting the appliqué
setting, move the pattern to the desired
position.
Memo
• To cancel the setting, press
• If no pattern is selected, the key appears
darkened and cannot be selected.
→ The steps for creating the appliqué piece are added
to the sewing order.
292
and then, press to
is pressed, the pattern is moved
.
Memo
• Three steps are added to the sewing order:
appliqué cutting line, position of pattern
placement on the garment, and appliqué
stitching.
a Cutting line for appliqué
b Position of pattern placement on garment
c Appliqué stitching
Note
• An appliqué piece cannot be created if the
pattern is too large or too complicated or a
combined pattern is separated. Even if the
selected pattern fits within the embroidering
area, the entire appliqué pattern may
exceed the embroidering area when the
outline is added. If an error message
appears, select a different pattern or edit it.
g
Fuse or stick a piece of stabilizer to the
back of the felt or denim fabric to be used
as the appliqué piece.
Note
• For best results, be sure to use stabilizer
material for embroidering.
a
b
c