Positioning The Pattern On Thick Fabric - Brother 882-W20/W22 Operation Manual

b
Press and select the USB port to save
image.
→ After the short melody, the image file will be saved
to the USB media.
c
Remove the USB media, and then check the
saved image using a computer.
→ The files for scanned images are saved with the
name "BG**.JPG" in a folder labeled "bPocket".
* "**" in the name "BG**.JPG" will automatically be
replaced with a number between 00 and 99.
■ Positioning the Pattern on Thick
Fabric
When positioning the pattern on thick fabric such as
quilting, the fabric may not be detected correctly. In
order for the fabric to be correctly detected, its
thickness must first be measured.
Memo
• This feature is functional only when the fabric is
scanned. It will not affect embroidering if it is turned
on with normal embroidery.
a
Hoop the fabric in the embroidery frame, and
then attach the frame to the embroidery
machine.
b
Select the pattern, and then press
c
Display page 9 of the Settings screen, and
then set "Fabric Thickness Sensor" to "ON".
d
Press .
e
Press .
VARIOUS EMBROIDERING FUNCTIONS
f
Affix the embroidery positioning sticker to the
fabric within the area indicated by the red
frame in the LCD, and then press
g
When the following message appears, remove
the embroidery positioning sticker, and then
press
.
→ The embroidery frame is moved, and the
embroidery positioning sticker affixed to the fabric is
detected.
h
Continue with step
the pattern with the desired embroidery
position.
• Use fabrics with a thickness of less than 3 mm
(approx. 1/8 inch). Using fabrics thicker than 3 mm
(approx. 1/8 inch) may cause the needle to break.
.
g
on page 288 to align
CAUTION
.
7
289