Brother 882-W20/W22 Operation Manual page 327

While making sure that the two positioning
stickers do not peel off, remove the
embroidery frame from the machine, and
then rehoop the fabric. Be sure to hoop the
fabric so the next pattern and both the
positioning stickers are within the
embroidery sewing area. Reattach the
frame and press
a Pattern to be embroidered next
b Centers of large circles for stickers
c Embroidery sheet
→ The camera detects the two positioning stickers.
.
USING THE CAMERA TO CONNECT PATTERNS
Note
• If either of the following messages appear,
rehoop the fabric so that the next pattern
and both the positioning stickers are within
the embroidery sewing area as indicated in
the screen.
Press to detect the positioning
stickers.
• If the machine detects that the next pattern
and the centers of the large circles of the
two positioning stickers do not fit within the
embroidering area, the operation will be
paused. Follow the on-screen instructions
to reposition the positioning stickers. Refer
to "Changing the Position of a Sticker" on
page 327 to reposition the stickers.
• If the sticker peels off during this procedure,
the patterns cannot be connected. If this
occurs, restart the procedure from the
beginning.
7
325