Attaching The Embroidery Frame; Removing The Embroidery Frame - Brother 882-W20/W22 Operation Manual

Embroidery and sewing machine
Table of Contents

Advertisement

ATTACHING THE EMBROIDERY FRAME

Note
• Wind and insert the bobbin before attaching the embroidery frame.
a
Press the "Presser Foot Lifter" button to
raise the presser foot.
b
Align the embroidery frame guide with the
right edge of the embroidery frame holder.
a Embroidery frame holder
b Embroidery frame guide
c
Slide the embroidery frame into the holder,
making sure to align the embroidery frame's
with the holder's
a Arrow mark
d
.

■ Removing the Embroidery Frame

a

ATTACHING THE EMBROIDERY FRAME

Lower the frame-securing lever to be level
with the frame to secure the embroidery
frame in the embroidery frame holder.
a Frame-securing lever
CAUTION
• If the frame-securing lever is not lowered, the
following message appears. You cannot start
sewing until you lower the frame-securing
lever.
Raise the frame-securing lever.
6
261

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

82-w2282-w20Xv8500d882-w20882-w22

Table of Contents