Moving A Point - Brother 882-W20/W22 Operation Manual

ENTERING STITCH DATA
g
Repeat the steps above for each point that
you have drawn on the grid sheet until the
stitch design is drawn on the screen as a
continuous line.
* Press to delete a selected point entered.
* Press
* Press
* Press to view an image of the stitch.
Memo
• If you have entered points that are too close
together, the fabric may not feed properly.
Edit the stitch data to leave a larger space
between points.
• If the stitch design is to be repeated and
linked, make sure that linking stitches are
added so that the stitch designs will not
overlap.
a Linking stitches
• You can touch on the grid sheet to set the
point, or you can also use a USB mouse.
202
to sew a test-run of the stitch.
to return to the original screen.

■ Moving a Point

a
Press or to move
that you want to move.
* To move to the first point, press
* To move to the last point, press
b
Use to move the point.
* You can also move
to the point
.
.
by using the touch pen.