Using The Multi-Purpose Screwdriver; Using The Spool Stand - Brother 882-W20/W22 Operation Manual

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
Using the Multi-purpose
Screwdriver
Since the screwdriver can be changed to three
different positions, it can be extremely useful for
the various machine preparations.
■ Position "1"
You can install/remove the presser foot holder,
needle clamp screw.
■ Position "2"
You can install/remove the needle plate.
24
■ Position "3"
The multi-purpose screwdriver can be positioned
over the screw on the embroidery frame to tighten
the screw after hooping the fabric or when removing
the fabric.
Note
• When rotating the multi-purpose
screwdriver, do not forcefully rotate it in the
direction that it does not rotate; otherwise, it
may break.

Using the Spool Stand

The included spool stand is useful when using
thread spools with a large diameter (cross-wound
thread). The spool stand can hold two spools of
thread.
1 2
4 5
7 8
No. Part Name
1 Telescopic thread guide
2 Spool support
3 Spool pin × 2
4 Screw and washer
5 Spool cap (XL) × 2
6 Spool holder × 2
7 Spool cap base × 2
8 Spool felt × 2
9 Ring × 4
3
6
9
Part Code
XE0776-001
XE4637-001
XA6313-051
XC7568-051
XE0779-001
XA0679-050
XE0780-001
XC7134-051
026030-136