Specifying The Embroidering Position With The Sensor Pen - Brother 882-W20/W22 Operation Manual

CONFIRMING THE PATTERN POSITION
g
A reminder message appears. Remove the
embroidery positioning sticker from the
fabric, and press
* To remove the embroidery positioning sticker more
easily, press
moves slightly forward and away from under the
needle. After the embroidery positioning sticker is
removed, press
h
Press the "Start/Stop" button to begin
embroidering.
* See "Embroidering Patterns" on page 274.
Note
• After the included embroidery positioning
stickers are used up, optional stickers are
available. For details, refer to "Options" on
page 22.
Specifying the Embroidering
Position With the Sensor Pen
By using the sensor pen, the embroidering position
can be adjusted to the desired location.
Note
• If the message "The carriage of the
embroidery unit will move. Keep your hands
etc. away from the carriage." appears
during the operation, ensure safety, and
then press
268
.
so that the embroidery frame
.
.
a
Press , and then
b
.
Press
→ The embroidering position selection screen appears.
c
Select the reference point for positioning
the embroidery pattern.
* To align the edge of the embroidery with a pattern
or mark on the fabric, select the edge of design. If
the center of the pattern to be embroidered is
determined, select the center position.
.