Adjusting the Needle Drop
Position with the Guideline
The red guideline marker indicates the sewing
position on the fabric. You can adjust the sewing
position by moving the guideline marker while
checking the guideline marker on the fabric.
• The guideline marker is a laser; therefore, do
not stare at the laser light directly. Otherwise
it may cause blindness.
to display the guideline marker.
→ The guideline marker scale appears.
Depending on the setting of "Initial Position" in the
settings screen, the initial needle drop position is
scaled as either 0.0 mm or 3.5 mm.
→ Adjust the position from 15.5 mm (5/8 inch) to the
right of the left needle to -3.5 mm (-1/8 inch) to the
left of the left needle.
again to stop using the guideline
to move the needle drop
■ Adjusting the Guideline Marker
If the guideline marker indicates the position
incorrectly in the center needle position, adjust the
initial position in the settings screen.
to display "Guideline Marker
Adjustment" in the settings screen.
Display settings screen.
→ The "Guideline Marker Adjustment" screen appears.
to adjust the guideline
a Press to move the guideline marker to the left
b Press to move the guideline marker to the right
twice to return to the original