Brother 882-W20/W22 Operation Manual page 8

IMPORTANT SAFETY INSTRUCTIONS
Laser Safety
This sewing machine is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS)
Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the
sewing machine does not produce hazardous laser radiation.
IEC 60825-1 Specification
This sewing machine is a Class 1 laser product as defined in IEC 60825-1:2007 specifications.
The laser beam emitted by the laser unit installed in this machine is restricted to an output at a safe level. However, the machine
contains 6-milliwat, 630-640nanometer wavelength, 6-12 degree at parallel divergence angle, 24-34 degree at perpendicular
divergence angle, InGaAlP laser diodes. Therefore, eye damage may result from disassembling or altering this machine.
Safety precautions have been designed to prevent any possible laser beam exposure to the operator.
FDA Regulations
U.S. Food and Drug Administration (FDA) has implemented regulations for laser products manufactured on and after August 2,
1976. Compliance is mandatory for products marketed in the United States. The label shown on the back of the sewing machine
indicates compliance with the FDA regulations and must be attached to laser products marketed in the United States.
Brother Industries, Ltd.
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, JAPAN
This product complies with FDA performance standards for laser
products except for deviations pursuant to Laser Notice No. 50,
dated June 24, 2007.
• Use of controls, adjustments or the performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
6
Laser Notices (For U.S.A. only)
CAUTION