Brother 882-W20/W22 Operation Manual page 328

USING THE CAMERA TO CONNECT PATTERNS
q
After the positioning stickers have been
detected, press
stickers.
r
Lower the presser foot, and then embroider
the second pattern.
→ When embroidering is finished, the following
message appears.
To connect a third pattern, press
s
When the following message appears, press
.
t
Select the third pattern C, and press
326
, and then remove the
.
.
u
Press , and then select how the
patterns will be connected.
→ The pattern connection setting screen appears.
Memo
• You can edit the third pattern in this screen.
v
Specify the position of the third pattern
referring to the screen display.
In this example, press
. Press after specifying the position.
b
a
c
a Connecting point
b Second pattern B
c Third pattern C
2 times and then, press