Using The Knee Lifter - Brother 882-W20/W22 Operation Manual

USEFUL FUNCTIONS
b
Press to select the pivot setting.
→ The key appears as
c
Place the fabric under the presser foot with
the needle at the starting point of the
stitching, and then press the "Start/Stop"
button. The machine will begin sewing.
Memo
• If you press the "Start/Stop" button to
pause sewing, press it again to continue,
reverse stitches (or reinforcement stitches)
will not be sewn.
d
Press the "Start/Stop" button to stop the
machine at the point where the sewing
direction changes.
→ The machine stops with the needle in the fabric, and
the presser foot is raised.
96
.
e
Rotate the fabric, and then press the "Start/
Stop" button.
→ The presser foot is automatically lowered, and
sewing continues.

Using the Knee Lifter

Using the knee lifter, you can raise and lower the
presser foot with your knee, leaving both hands
free to handle the fabric.
a
Change the operating position of the knee
lifter handle before inserting into the
machine.
Slide up the knee lifter handle slightly and
rotate it while releasing pressure so handle
will click into position.
* The knee lifter can be adjusted to three different
angles.
a Knee lifter handle
→ Rotate knee lifter handle till it clicks into the
selected position that is most comfortable for you.