Connecting Character Patterns - Brother 885-V94 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Connecting character patterns

If the character pattern is too long to fit in the
embroidery frame, follow the steps below.
Example: Connecting "ABC" with "DEF"
a
Enter "ABC" and press
b Press
cutting (
c Press
d Press
e Press
.
to turn off the automatic thread
).
(Back key).
.
.
f Press to turn it to
X
The stitching starting point is set to lower left
of the design.
g Lower the presser foot, and then press
(Start/stop switch) to begin sewing.
h
When embroidering is finished, trim the thread
leaving the end of the thread longer than
usual. Then reset the fabric in the embroidery
frame, in a position where you can sew "DEF".
a
a Embroidery start position
b Embroidery end position
i Enter "DEF" and press
j
Press .
k Press to turn it to
X
The stitching starting point is set to lower left
of the design.
Editing and Saving Patterns 165
.
b
.
.
4