Attaching The Embroidery Frame Holder - Brother 884-T11 Operation Manual

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Attaching the embroidery
frame holder
Attach the embroidery frame holder to the carriage.
1 Use the embroidery frame holder
appropriate for the embroidery frame that
you are using. (Refer to page 90 to 92.)
2 Remove the two thumb screws of the
embroidery frame holder.
1 Thumb screws
2 Corner covers
3 Align the holes in the embroidery frame
holder with the pins on the frame-mounting
plate of the carriage.
1 Pins on the frame-mounting plate
2 Holes in the embroidery frame holder
3 Corner covers
32
Note
● Each embroidery frame holder has
different color of corner cover.
Holder A: White corner covers
Holder B: Light gray corner covers
Holder C: Dark gray corner covers
(Optional)
4 Secure the embroidery frame holder with
the two thumb screws removed in step
1 Thumb screws
Note
● Using the disc-shaped screwdriver
included, firmly tighten the thumb screws.
● Two types of embroidery frame holders
are included with this machine.
Embroidery frame holder A is used with
the four included embroidery frames.
(Refer to "Correctly Using the Embroidery
Frames" on page 90 for the details.)
This completes the preparation of the machine.
2
.