Attaching The Embroidery Frame - Brother 882-W73 Operation Manual

ATTACHING THE EMBROIDERY
FRAME
Note
• Wind embroidery bobbin thread and insert the
bobbin before attaching the embroidery frame.
Check that there is enough thread in the bobbin.
• Make sure that the frame-securing lever is correctly
lowered after the embroidery frame has been
installed in the embroidery frame holder.
a
Press (Presser foot lifter button) to raise the
presser foot.
b
Align the embroidery frame guide with the right edge
of the embroidery frame holder.
1 Embroidery frame holder
2 Embroidery frame guide
c
Slide the embroidery frame into the holder, making
sure to align the embroidery frame's
holder's .
1 Arrow mark
d
Lower the frame-securing lever to be level with the
frame to secure the embroidery frame in the
embroidery frame holder.
1 Frame-securing lever
 Removing the Embroidery Frame
a
Press
presser foot.
b
Raise the frame-securing lever.
c
Pull the embroidery frame toward you.
with the

ATTACHING THE EMBROIDERY FRAME

(Presser foot lifter button) to raise the
4
129