Removing And Placing The Toothed Belt Cover - DURKOPP ADLER 991-210-10 Series Service Instructions Manual

Working basis

3.3.5 Removing and placing the toothed belt cover

Fig. 5: Removing and placing the toothed belt cover
(1) - Screws
Removing the toothed belt cover
To remove the toothed belt cover:
1. Loosen the screws (1).
2. Remove toothed belt cover (2).
Placing the toothed belt cover
To place the toothed belt cover:
1. Place the toothed belt cover (2).
2. Tighten the screws (1).
Service Instructions 911-210-10 - 00.0 - 06/2020
①
(2) - Toothed belt cover
②
19