1-5-9 Optical section
(1) Detaching and refitting the laser scanner unit
Procedure
1. Remove the rear cover and inner
tray.(See page 1-5-5,1-5-6)
2. Remove the connector.
3. Remove the screw and then remove the
power source fan motor.
4. Remove the connector.
5. Remove four screws and then remove
the laser scanner unit.
6. Check or replace the laser scanner unit
and refit all the removed parts.
Screw
Connector
1-5-23
Power source
fan motor
Connector
Figure 1-5-37
Screws
Laser scanner
unit (LSU)
Figure 1-5-38
2K3/2L3
Screw
Screw