Removing Fixtures; Remove Fixture(S)? Dialogue Box - Lightwave Research Status Cue User Manual

Removing Fixtures

In the event fixtures are removed from the rig or a mistake was made adding
fixtures, you may remove individual or a range of fixtures.
Caution: removing fixtures will cause all data and attributes to the selected fixtures to
be removed from the entire Show (Scene, Sequence, etc.).
To remove fixtures, perform the following steps:
1. Bring up the Fixture Setup
2. Select the fixture(s) that you wish to remove (refer to Step 2 on (4-6)).
3. Click the Remove
operation through the
Figure 4.11. Remove Fixture(s)? Dialogue Box
4. Click on the Yes
cancel the operation.
dialogue box (if it is not already on the screen).
button. You will be prompted to continue or cancel this
Remove Fixture(s)?
button to continue (remove fixtures) or the
dialogue box. Refer to Figure 4.11.
No button to
Chapter 4 Fixture Setup 4-11
4